All ports
Port2827/UDP
slc-ctrlrloopsPort
2827
Protocol
UDP
Category
Registered
Service
slc-ctrlrloops
What is port 2827?
Port 2827/UDP is a Registered port, registered with IANA for specific applications. It is associated with the slc-ctrlrloops service.
slc ctrlrloops
Useful commands
nmapnmap -p 2827 -sV example.comnetcatnc -zv example.com 2827curlcurl -v http://example.com:2827/telnettelnet example.com 2827bash(echo > /dev/udp/example.com/2827) 2>/dev/nullFirewall commands
UFWAllow
sudo ufw allow 2827/udpDeny
sudo ufw deny 2827/udpiptablesAllow
sudo iptables -A INPUT -p udp --dport 2827 -j ACCEPTDeny
sudo iptables -D INPUT -p udp --dport 2827 -j ACCEPTfirewalldAllow
sudo firewall-cmd --permanent --add-port=2827/udpWindowsAllow
netsh advfirewall firewall add rule name="Open Port 2827" dir=in action=allow protocol=UDP localport=2827Security Risks
- Unauthorized access to the service
- Data exposure if the service is unauthenticated
- Outdated versions with vulnerabilities
- Incorrect service configuration
Frequently Asked Questions
What service runs on port 2827/UDP?
Port 2827/UDP is associated with the slc-ctrlrloops service. slc ctrlrloops
Is it safe to expose port 2827 to the Internet?
It depends on the service and configuration. Port 2827 (slc-ctrlrloops) is a Registered port. If you need to expose it, keep the service updated, use strong authentication, and configure a firewall. It's always recommended to restrict access by IP when possible.
How do I check if port 2827 is open?
You can use nmap: `nmap -p 2827 -sV example.com`, netcat: `nc -zv example.com 2827`, or the bash command: `(echo > /dev/udp/example.com/2827) 2>/dev/null && echo "Open" || echo "Closed"`.
How do I open or close port 2827 on my firewall?
On Linux with UFW: `sudo ufw allow 2827/udp` (open) or `sudo ufw deny 2827/udp` (close). With iptables: `sudo iptables -A INPUT -p udp --dport 2827 -j ACCEPT`. On Windows: `netsh advfirewall firewall add rule name="Open Port 2827" dir=in action=allow protocol=UDP localport=2827`.
What applications and services use port 2827?
Port 2827/UDP is used by the slc-ctrlrloops service. Specific uses depend on the software and configuration. Check our related tools section for more information.