All ports
Port2404/TCP
iec-104Port
2404
Protocol
TCP
Category
Registered
Service
iec-104
What is port 2404?
Port 2404/TCP is a Registered port, registered with IANA for specific applications. It is associated with the iec-104 service.
IEC 60870-5-104 process control over IP
Useful commands
nmapnmap -p 2404 -sV example.comnetcatnc -zv example.com 2404curlcurl -v http://example.com:2404/telnettelnet example.com 2404bash(echo > /dev/tcp/example.com/2404) 2>/dev/nullFirewall commands
UFWAllow
sudo ufw allow 2404/tcpDeny
sudo ufw deny 2404/tcpiptablesAllow
sudo iptables -A INPUT -p tcp --dport 2404 -j ACCEPTDeny
sudo iptables -D INPUT -p tcp --dport 2404 -j ACCEPTfirewalldAllow
sudo firewall-cmd --permanent --add-port=2404/tcpWindowsAllow
netsh advfirewall firewall add rule name="Open Port 2404" dir=in action=allow protocol=TCP localport=2404Security Risks
- Unauthorized access to the service
- Data exposure if the service is unauthenticated
- Outdated versions with vulnerabilities
- Incorrect service configuration
Frequently Asked Questions
What service runs on port 2404/TCP?
Port 2404/TCP is associated with the iec-104 service. IEC 60870-5-104 process control over IP
Is it safe to expose port 2404 to the Internet?
It depends on the service and configuration. Port 2404 (iec-104) is a Registered port. If you need to expose it, keep the service updated, use strong authentication, and configure a firewall. It's always recommended to restrict access by IP when possible.
How do I check if port 2404 is open?
You can use nmap: `nmap -p 2404 -sV example.com`, netcat: `nc -zv example.com 2404`, or the bash command: `(echo > /dev/tcp/example.com/2404) 2>/dev/null && echo "Open" || echo "Closed"`.
How do I open or close port 2404 on my firewall?
On Linux with UFW: `sudo ufw allow 2404/tcp` (open) or `sudo ufw deny 2404/tcp` (close). With iptables: `sudo iptables -A INPUT -p tcp --dport 2404 -j ACCEPT`. On Windows: `netsh advfirewall firewall add rule name="Open Port 2404" dir=in action=allow protocol=TCP localport=2404`.
What applications and services use port 2404?
Port 2404/TCP is used by the iec-104 service. Specific uses depend on the software and configuration. Check our related tools section for more information.