All ports
Port1390/UDP
iclpv-scPort
1390
Protocol
UDP
Category
Registered
Service
iclpv-sc
What is port 1390?
Port 1390/UDP is a Registered port, registered with IANA for specific applications. It is associated with the iclpv-sc service.
Storage Controller
Useful commands
nmapnmap -p 1390 -sV example.comnetcatnc -zv example.com 1390curlcurl -v http://example.com:1390/telnettelnet example.com 1390bash(echo > /dev/udp/example.com/1390) 2>/dev/nullFirewall commands
UFWAllow
sudo ufw allow 1390/udpDeny
sudo ufw deny 1390/udpiptablesAllow
sudo iptables -A INPUT -p udp --dport 1390 -j ACCEPTDeny
sudo iptables -D INPUT -p udp --dport 1390 -j ACCEPTfirewalldAllow
sudo firewall-cmd --permanent --add-port=1390/udpWindowsAllow
netsh advfirewall firewall add rule name="Open Port 1390" dir=in action=allow protocol=UDP localport=1390Security Risks
- Unauthorized access to the service
- Data exposure if the service is unauthenticated
- Outdated versions with vulnerabilities
- Incorrect service configuration
Frequently Asked Questions
What service runs on port 1390/UDP?
Port 1390/UDP is associated with the iclpv-sc service. Storage Controller
Is it safe to expose port 1390 to the Internet?
It depends on the service and configuration. Port 1390 (iclpv-sc) is a Registered port. If you need to expose it, keep the service updated, use strong authentication, and configure a firewall. It's always recommended to restrict access by IP when possible.
How do I check if port 1390 is open?
You can use nmap: `nmap -p 1390 -sV example.com`, netcat: `nc -zv example.com 1390`, or the bash command: `(echo > /dev/udp/example.com/1390) 2>/dev/null && echo "Open" || echo "Closed"`.
How do I open or close port 1390 on my firewall?
On Linux with UFW: `sudo ufw allow 1390/udp` (open) or `sudo ufw deny 1390/udp` (close). With iptables: `sudo iptables -A INPUT -p udp --dport 1390 -j ACCEPT`. On Windows: `netsh advfirewall firewall add rule name="Open Port 1390" dir=in action=allow protocol=UDP localport=1390`.
What applications and services use port 1390?
Port 1390/UDP is used by the iclpv-sc service. Specific uses depend on the software and configuration. Check our related tools section for more information.