All ports
Port4372/UDP
l2c-dataPort
4372
Protocol
UDP
Category
Registered
Service
l2c-data
What is port 4372?
Port 4372/UDP is a Registered port, registered with IANA for specific applications. It is associated with the l2c-data service.
LAN2CAN Data
Useful commands
nmapnmap -p 4372 -sV example.comnetcatnc -zv example.com 4372curlcurl -v http://example.com:4372/telnettelnet example.com 4372bash(echo > /dev/udp/example.com/4372) 2>/dev/nullFirewall commands
UFWAllow
sudo ufw allow 4372/udpDeny
sudo ufw deny 4372/udpiptablesAllow
sudo iptables -A INPUT -p udp --dport 4372 -j ACCEPTDeny
sudo iptables -D INPUT -p udp --dport 4372 -j ACCEPTfirewalldAllow
sudo firewall-cmd --permanent --add-port=4372/udpWindowsAllow
netsh advfirewall firewall add rule name="Open Port 4372" dir=in action=allow protocol=UDP localport=4372Security Risks
- Unauthorized access to the service
- Data exposure if the service is unauthenticated
- Outdated versions with vulnerabilities
- Incorrect service configuration
Frequently Asked Questions
What service runs on port 4372/UDP?
Port 4372/UDP is associated with the l2c-data service. LAN2CAN Data
Is it safe to expose port 4372 to the Internet?
It depends on the service and configuration. Port 4372 (l2c-data) is a Registered port. If you need to expose it, keep the service updated, use strong authentication, and configure a firewall. It's always recommended to restrict access by IP when possible.
How do I check if port 4372 is open?
You can use nmap: `nmap -p 4372 -sV example.com`, netcat: `nc -zv example.com 4372`, or the bash command: `(echo > /dev/udp/example.com/4372) 2>/dev/null && echo "Open" || echo "Closed"`.
How do I open or close port 4372 on my firewall?
On Linux with UFW: `sudo ufw allow 4372/udp` (open) or `sudo ufw deny 4372/udp` (close). With iptables: `sudo iptables -A INPUT -p udp --dport 4372 -j ACCEPT`. On Windows: `netsh advfirewall firewall add rule name="Open Port 4372" dir=in action=allow protocol=UDP localport=4372`.
What applications and services use port 4372?
Port 4372/UDP is used by the l2c-data service. Specific uses depend on the software and configuration. Check our related tools section for more information.