All ports
Port649/UDP
cadview-3dPort
649
Protocol
UDP
Category
Well-Known
Service
cadview-3d
What is port 649?
Port 649/UDP is a Well-Known port, assigned by IANA for widely recognized services. It is associated with the cadview-3d service.
Cadview-3d - streaming 3d models over the internet
Useful commands
nmapnmap -p 649 -sV example.comnetcatnc -zv example.com 649curlcurl -v http://example.com:649/telnettelnet example.com 649bash(echo > /dev/udp/example.com/649) 2>/dev/nullFirewall commands
UFWAllow
sudo ufw allow 649/udpDeny
sudo ufw deny 649/udpiptablesAllow
sudo iptables -A INPUT -p udp --dport 649 -j ACCEPTDeny
sudo iptables -D INPUT -p udp --dport 649 -j ACCEPTfirewalldAllow
sudo firewall-cmd --permanent --add-port=649/udpWindowsAllow
netsh advfirewall firewall add rule name="Open Port 649" dir=in action=allow protocol=UDP localport=649Security Risks
- Unauthorized access to the service
- Data exposure if the service is unauthenticated
- Outdated versions with vulnerabilities
- Incorrect service configuration
Frequently Asked Questions
What service runs on port 649/UDP?
Port 649/UDP is associated with the cadview-3d service. Cadview-3d - streaming 3d models over the internet
Is it safe to expose port 649 to the Internet?
It depends on the service and configuration. Port 649 (cadview-3d) is a Well-Known port. If you need to expose it, keep the service updated, use strong authentication, and configure a firewall. It's always recommended to restrict access by IP when possible.
How do I check if port 649 is open?
You can use nmap: `nmap -p 649 -sV example.com`, netcat: `nc -zv example.com 649`, or the bash command: `(echo > /dev/udp/example.com/649) 2>/dev/null && echo "Open" || echo "Closed"`.
How do I open or close port 649 on my firewall?
On Linux with UFW: `sudo ufw allow 649/udp` (open) or `sudo ufw deny 649/udp` (close). With iptables: `sudo iptables -A INPUT -p udp --dport 649 -j ACCEPT`. On Windows: `netsh advfirewall firewall add rule name="Open Port 649" dir=in action=allow protocol=UDP localport=649`.
What applications and services use port 649?
Port 649/UDP is used by the cadview-3d service. Specific uses depend on the software and configuration. Check our related tools section for more information.