All ports
Port686/UDP
hcp-wismarPort
686
Protocol
UDP
Category
Well-Known
Service
hcp-wismar
What is port 686?
Port 686/UDP is a Well-Known port, assigned by IANA for widely recognized services. It is associated with the hcp-wismar service.
Hardware Control Protocol Wismar
Useful commands
nmapnmap -p 686 -sV example.comnetcatnc -zv example.com 686curlcurl -v http://example.com:686/telnettelnet example.com 686bash(echo > /dev/udp/example.com/686) 2>/dev/nullFirewall commands
UFWAllow
sudo ufw allow 686/udpDeny
sudo ufw deny 686/udpiptablesAllow
sudo iptables -A INPUT -p udp --dport 686 -j ACCEPTDeny
sudo iptables -D INPUT -p udp --dport 686 -j ACCEPTfirewalldAllow
sudo firewall-cmd --permanent --add-port=686/udpWindowsAllow
netsh advfirewall firewall add rule name="Open Port 686" dir=in action=allow protocol=UDP localport=686Security Risks
- Unauthorized access to the service
- Data exposure if the service is unauthenticated
- Outdated versions with vulnerabilities
- Incorrect service configuration
Frequently Asked Questions
What service runs on port 686/UDP?
Port 686/UDP is associated with the hcp-wismar service. Hardware Control Protocol Wismar
Is it safe to expose port 686 to the Internet?
It depends on the service and configuration. Port 686 (hcp-wismar) is a Well-Known port. If you need to expose it, keep the service updated, use strong authentication, and configure a firewall. It's always recommended to restrict access by IP when possible.
How do I check if port 686 is open?
You can use nmap: `nmap -p 686 -sV example.com`, netcat: `nc -zv example.com 686`, or the bash command: `(echo > /dev/udp/example.com/686) 2>/dev/null && echo "Open" || echo "Closed"`.
How do I open or close port 686 on my firewall?
On Linux with UFW: `sudo ufw allow 686/udp` (open) or `sudo ufw deny 686/udp` (close). With iptables: `sudo iptables -A INPUT -p udp --dport 686 -j ACCEPT`. On Windows: `netsh advfirewall firewall add rule name="Open Port 686" dir=in action=allow protocol=UDP localport=686`.
What applications and services use port 686?
Port 686/UDP is used by the hcp-wismar service. Specific uses depend on the software and configuration. Check our related tools section for more information.